Tightness and Strength Indicators of  Concrete Pipes

​

​​​

Concrete Pipe Specifications – DN 150 mm

• Technical Parameters: Nominal diameter: DN 150 mm | Maximum load strength: 40.5 kN/m | Strength class: 270 kN/m

   

• Water Resistance: When exposed to internal pressure at a value of 50 kPa (at a value of 0.5 bar or about 5 meters of water), there is no leakage at the junction and in the pipe.

   

• Bending & Durability: Strength of the longitudinal bending moment dimensions are sufficient. Durability is suitable taking into account environmental conditions. Durability of connections is proven in accordance with Method 4, which is usually used for wastewater, rainwater, and surface water in underground pipelines.

   

• Pipe Properties: Pre-treated concrete pipe with mounting seal, circular cross-section, without equipment.

   

Concrete Pipe Specifications – DN 200 mm

• Technical Parameters: Nominal diameter: DN 200 mm | Maximum load: 52 kN/m | Strength class: 260 kN/m

   

• Water Resistance: When exposed to internal pressure at a value of 50 kPa (at a value of 0.5 bar or about 5 meters of water), there is no leakage at the junction and in the pipe.

   

• Bending & Durability: Strength of the longitudinal bending moment dimensions are sufficient. Durability is suitable taking into account environmental conditions. Durability of connections is proven in accordance with Method 2 (calculation method), which is usually used for the transfer of wastewater, rainwater, and surface water in underground pipelines.

   

• Pipe Properties: Pre-treated concrete pipe with mounting seal, circular cross-section, without equipment.

   

 Concrete Pipe Specifications – DN 300 mm

• Technical Parameters: Nominal diameter: DN 300 mm | Maximum load strength: 51 kN/m | Strength class: 170 kN/m

   

• Water Resistance: When exposed to internal pressure at a value of 50 kPa (at a value of 0.5 bar or about 5 meters of water), there is no leakage at the junction and in the pipe.

   

• Bending & Durability: Strength of the longitudinal bending moment dimensions are sufficient. Location is suitable for use taking into account environmental conditions. Durability of connections is proven in accordance with Method 2 (calculation method), which is usually used for the transfer of wastewater, rainwater, and surface water in underground pipelines.

   

• Pipe Properties: Pre-treated concrete pipe with mounting seal, circular cross-section, without equipment.

   

 Concrete Pipe Specifications – DN 400 mm

• Technical Parameters: Nominal diameter: DN 400 mm | Maximum load strength: 52 kN/m | Strength class: 130 kN/m

   

• Water Resistance: When exposed to internal pressure at a value of 50 kPa (at a value of 0.5 bar or about 5 meters of water), there is no leakage at the junction and in the pipe.

   

• Bending & Durability: Strength of the longitudinal bending moment dimensions are sufficient. Location is suitable for use with regard to environmental conditions. Durability of connections is proven according to Method 2 (calculation method), which is usually used for the transfer of wastewater, rainwater, and surface water in underground pipelines.

   

• Pipe Properties: Pre-treated concrete pipe with mounting seal, circular cross-section, without equipment.

   

Concrete Pipe Specifications – DN 500 mm

• Technical Parameters: Nominal diameter: DN 500 mm | Maximum load: 42.5 kN/m | Strength class: 85 kN/m

   

• Water Resistance: When exposed to internal pressure at a value of 50 kPa (at a value of 0.5 bar or about 5 meters of water), there is no leakage at the junction and in the pipe.

   

• Bending & Durability: Strength of the longitudinal bending moment dimensions are sufficient. Location is suitable for use with regard to environmental conditions. Durability of connections is proven according to Method 2 (calculation method), which is usually used for the transfer of wastewater, rainwater, and surface water in underground pipelines.

   

• Pipe Properties: Pre-treated concrete pipe with mounting seal, circular cross-section, without equipment.

   

Concrete Pipe Specifications – DN 600 mm

• Technical Parameters: Nominal diameter: DN 600 mm | Maximum load strength: 45 kN/m | Strength class: 75 kN/m

   

• Water Resistance: When exposed to internal pressure at a value of 50 kPa (at a value of 0.5 bar or about 5 meters of water), there is no leakage at the junction and in the pipe.

   

• Bending & Durability: Strength of the longitudinal bending moment dimensions are sufficient. Location is suitable for use taking into account environmental impact. Durability of connections is proven according to Method 2 (calculation method), which is usually used for the transfer of wastewater, rainwater, and surface water in underground pipelines.

   

• Pipe Properties: Pre-treated concrete pipe with mounting seal, circular cross-section, without equipment.